因業務調整，部分個人測試暫不接受委托，望見諒。

檢測項目

粘度檢測：測量環氧樹脂在特定溫度下的流動性能，影響其涂布、灌注和加工過程的均勻性，確保材料在實際應用中的可操作性和一致性。

固化時間檢測：確定環氧樹脂從液態到完全固化狀態所需的時間， crucial for controlling processing schedules and ensuring proper material handling in various applications.

硬度檢測：評估固化后環氧樹脂的表面硬度，使用 Shore 或 other scales to indicate material resistance to indentation and wear in end-use environments.

拉伸強度檢測：測量環氧樹脂在拉伸負載下的最大應力值， indicating the material's ability to withstand pulling forces without failure, essential for structural applications.

壓縮強度檢測：評估環氧樹脂在壓縮應力下的性能， determining its capacity to resist deformation under crushing loads, critical for load-bearing components.

彎曲強度檢測：測定環氧樹脂在彎曲力矩下的 resistance, reflecting its durability and flexibility under mechanical stress in applications like composites.

熱變形溫度檢測：確定環氧樹脂在熱負載下開始變形的溫度， indicating thermal stability and suitability for high-temperature environments.

玻璃化轉變溫度檢測：測量環氧樹脂從玻璃態轉變?yōu)橄鹉z態的溫度點， crucial for understanding its thermal behavior and performance in varying conditions.

電氣性能檢測：包括介電常數和體積電阻率的測量， evaluating epoxy resin's insulation properties for use in electronic and electrical applications.

化學 resistance檢測：評估環氧樹脂對化學品如 acids, solvents 的耐受性， ensuring longevity and reliability in corrosive environments.

檢測范圍

環氧樹脂涂料：用于金屬防腐、地板涂裝和表面保護，需檢測耐候性、附著力 and curing properties to ensure long-term performance.

復合材料：如碳纖維或玻璃纖維增強環氧樹脂，應用于航空航天和 automotive sectors, requiring tests for strength, stiffness, and fatigue resistance.

膠粘劑：用于 bonding metals, plastics, and other materials, necessitating assessments of adhesive strength, durability, and environmental resistance.

電子封裝材料：用于集成電路和組件封裝，需檢測電氣絕緣性、熱 conductivity, and moisture resistance to protect sensitive electronics.

建筑用環氧樹脂：應用于地坪、裂縫修復和 structural reinforcements, requiring tests for耐磨性、固化時間和 mechanical integrity.

汽車零部件：如環氧樹脂基 composites for parts, needing evaluation of impact strength, thermal stability, and weight reduction properties.

船舶涂料：用于船體防護和 marine applications, demanding tests for耐鹽霧性、附著力 and corrosion resistance.

風力葉片：環氧樹脂用于風力 turbine blades, requiring rigorous testing of fatigue performance, strength, and environmental durability.

體育用品：如高爾夫球桿或 bicycle frames, needing assessments for輕量化、強度 and impact resistance.

醫療設備：用于 implants or device housings, requiring tests for生物相容性、機械性能 and sterilization resistance.

檢測標準

ASTM D1084-16：標準測試方法 for measuring the viscosity of epoxy resins, providing guidelines for sample preparation and measurement conditions to ensure accuracy.

ISO 11357-2:2013：塑料熱分析標準，包括 differential scanning calorimetry for determining glass transition temperature and curing behavior of epoxy resins.

GB/T 2567-2008：樹脂澆鑄體性能試驗方法， covering various mechanical tests such as tensile, compression, and bending for epoxy materials.

ASTM D638-14：塑料拉伸性能標準測試方法， applicable to epoxy resins for determining tensile strength, elongation, and modulus.

ISO 527-2:2012：塑料拉伸測試國際標準， specifying procedures for testing epoxy-based materials to ensure consistency in mechanical property evaluation.

GB/T 1040.2-2006：塑料拉伸性能試驗方法，用于環氧樹脂的拉伸測試，提供詳細的試樣制備和測試參數。

ASTM D790-17：塑料彎曲性能標準測試方法， for evaluating the flexural properties of epoxy resins under three-point bending conditions.

ISO 178:2019：塑料彎曲測試國際標準，用于測定環氧樹脂的彎曲強度和 modulus, ensuring material performance in structural applications.

ASTM D648-18：熱變形溫度測試標準， for measuring the temperature at which epoxy resins deform under load, critical for thermal performance assessment.

ISO 75-2:2013：塑料熱變形溫度測定標準， providing methods to test epoxy resins for their heat resistance and dimensional stability.

檢測儀器

旋轉粘度計：用于測量環氧樹脂的粘度，通過旋轉 spindle 在樣品中產生 shear stress, providing accurate data on flow behavior for processing control.

萬能試驗機：用于進行拉伸、壓縮和彎曲測試， equipped with load cells and extensometers to measure mechanical properties like strength and elasticity in epoxy resins.

硬度計：如 Shore 硬度計，用于測定固化環氧樹脂的表面硬度，通過 indentation depth measurement to assess material durability and wear resistance.

熱分析儀：如 differential scanning calorimetry (DSC) 儀器，用于測量環氧樹脂的玻璃化轉變溫度、固化放熱和 thermal stability, providing insights into thermal behavior.

介電強度測試儀：用于評估環氧樹脂的電氣絕緣性能

檢測報告作用

銷售報告：出具正規第三方檢測報告讓客戶更加信賴自己的產品質量，讓自己的產品更具有說服力。

研發使用：擁有優秀的檢測工程師和先進的測試設備，可降低了研發成本，節約時間。

司法服務：協助相關部門檢測產品，進行科研實驗，為相關部門提供科學、公正、準確的檢測數據。

大學論文：科研數據使用。

投標：檢測周期短，同時所花費的費用較低。

準確性高;工業問題診斷：較約定時間內檢測出產品問題點，以達到盡快止損的目的。